Qsky Precision Machinery Manufacturing Co., Ltd.

Brass Solenoid Valve

Brass Solenoid Valve

  • Features
  • Styles

Brass Solenoid Valve Features

Brass is relatively expensive, so brass is often used to make small household solenoid valves. Its characteristic is that the price is higher than the aluminum solenoid valve. The same type of solenoid valve, the brass is heavier than the aluminum. It applies to natural gas, liquefied petroleum gas, city gas and other non-corrosive gases.the more pressure the more tight seal, the valve can be guaranteed in more stable working conditions; Electric brass solenoid valve can maintain more than 10 years of effective action.

Brass solenoid valve is an actuator used in industrial process automation control system. It can automatically open or close the valve after receiving the electronic control signal to realize on-off or flow regulation control of the fluid medium in the pipeline, thereby automatically adjusting or remotely controlling the temperature, flow, pressure and other parameters in the system.

There are closed chambers in solenoid valves, and there are through holes in different positions. Each hole leads to different tubing. In the middle of the chamber is a valve, and on both sides are two electromagnets. The magnet coil electrifying valve body on either side will be attracted to their side. By controlling the movement of the valve body, different oil draining holes will be blocked or leaked out, while the oil inlet hole is often open. Hydraulic oil will enter different drain pipes, and then push the piston of the cylinder through the pressure of the oil. The piston will drive the piston rod, and the piston rod will drive the mechanical device. In this way, the mechanical movement is controlled by controlling the current cut off of the electromagnet.

Product Material: brass
Product applications: neutral gases, liquids
Medium Temperature: -5-80℃
Diaphragm seal, diaphragm material: nitrile butadiene rubber (NBR)

Brass solenoid gas valve is suitable for air, water, oil and other media. It can switch on and off in two-position mode with automatic control of liquid level, concentration, flow rate, metering or discharge cycle. It has electromagnetic direct-acting open valve structure with zero differential pressure open valve. With diaphragm seal, Qsky gas shut off brass solenoid valve has sensitive action, and is reliable when opening and closing.


Brass Solenoid Valve Styles

You May Also Like

  • Household Solenoid Valve

    Household Solenoid Valve

    April 28, 2018A gas solenoid valve is an electromechanical valve used to control gas flow rate. The solenoid valve is mainly composed of two major parts: the actuator and the valve body. The outer part of the actua...view
  • Industrial Solenoid Valve-Normally Closed

    Industrial Solenoid Valve-Normally Closed

    April 28, 2018These solenoid valves feature a normally closed valve configuration and are ideal for use with natural gas emergency shut off.view
  • Gas Leak Alarm

    Gas Leak Alarm

    April 28, 2018Gas leakage alarm is a very important gas safety equipment, and is the last protection for the safe use of city gas. It can detect the low concentration combustible gas in the surrounding environment ...view

News You May Be Interested

Leave us Message
  • TEL:+86-028-87111855
  • FAX:
  • EMAIL:qskysale@qsky-industrial.com
  • ADDRESS:Hengyun Science Park A17-3,Cheng A Avenue No.2 ,Jintang County,Cheng Du, Si Chuan Province, China